Comportamiento de la microestructura en la soldadura GMAW de aceros dúplex 2205 para aplicaciones mar adentro

Amado Cruz-Crespo, Juan A. Pozo-Morejón, Eduardo Valencia-Morales, Ivani De Souza-Bott, Jorge Victor Miguel-Oria

Resumen


En el presente trabajo se evaluó el comportamiento de la microestructura en la soldadura GMAW de aceros dúplex 2205 para aplicaciones mar adentro. Se realizaron soldaduras con dos nieveles de energía de entrada, 1,5 kJ/mm y 2,5 kJ/mm. De las soldaduras se extrajeron muestras para el análisis metalográfico por microscopía óptica de la zona afectada por el calor. A partir del procesamiento de imágenes se cuantificó la fracción de ferrita y austenita en la microestructura. Se concluye que la relación de fases austenita/ferrita en la ZAC se alteró, con respecto al metal base, sin mostrar diferencias significativas en función de la energía de entrada del proceso y que la microerstructura de la ZAC está constituida por una matriz ferrítica con austenita de contorno de grano (GBA), con austenita de Witmastatten (WA) y con austenita intragranular (IGA). Para aplicaciones mar adento es recomendable usar la energía de entrada de 1,5 kJ/mm.

Palabras clave


aceros inoxidables dúplex; GMAW; ZAC; microestructura.

Texto completo:

PDF

Referencias


ASTM E3. 2011: Standard Guide for Preparation of Metallographic Specimens. American Society for Testing and Materials, West Conshohocken, 12 p.

ASTM E407. 1999: Standard Practice for Microetching Metals and Alloys. American Society for Testing and Materials, West Conshohocken, 21 p.

Graziano, U.; Firrao, D. and Taveri, G. 2015: Caracterization of welded joints (MIG and SAW) on LDX 2101 Dúplex SS. Procedia Engeneering, 109: 484-491.

Morales, E. V.; Betancourta, G.; Olaya, L. and Bott, L. 2022: Some Insight on the Heat-affected Zone Strengthening Mechanisms in Duplex Stainless Steels. Materials Research, 25: 1-11.

Morales, E. V.; Pozo, J. A.; Olaya, L.; Kassab, E.; Ponciano, J. A. C.; Ghavami, K. and Bott, I. S. 2019: Remarks on the evolution and performance of the different austenite morphologies at the simulated HAZs of a 2205 duplex stainless steel. J Mater. Res Technol., 8(5): 3936–3949.

Nowacki, J. and Łukojć, A. 2005: Structure and properties of the heat-affected zone of duplex steels welded joints. Journal of Materials Processing Technology, 164–165: 1074–1081.

Paulraj, P. and Garg, R. 2015: Effect of intermetallic phases on corrosion behavior and mechanical properties of duplex stainless steel and super-duplex stainless steel. Adv. Sci. Technol. Res. J., 27(9): 87–105.

Scotti, A. and Ponomarev, V. 2008: Soldagem MIG/MAG: Melhor entendimento, melhor desempenho. Artliber, Säo Paolo, 284 p.

Sieurin, H. and Sandström, R. 2006: Austenite reformation in the heat-affected zone of duplex stainless steel 2205. Materials Science and Engineering, A 418: 250–256.

Souza Da Silva, D.; De Queiroz, A. V.; Xavier, C. R.; Marcelo, C. J.; De Castro, J. A. and Mendes De Oliveira, E. 2016: Modelo duplo-elipsoide acoplado a volumes finitos para simular a soldagem GMAW do aço inoxidável duplex SAF 2205. Tecnol. Metal. Mater. Miner., 13(2): 148-156.

Touileb, K.; Hedhibi, A. C.; Djoudjou, R.; Ouis, A.; Bensalama, A.; Ibrahim, A.; Abdo, H. S.; Ahmed, M. M. Z. 2022: Mechanical, microstructure, and corrosion characterization of dissimilar austenitic 316L and duplex 2205 stainless-steel ATIG welded joints. Materials, 15(2470): 1-21.

Xavier, C. R.; Guimarães, H. and De Castro, J. A. 2015: An Experimental and Numerical Approach for the Welding Effects on the Duplex Stainless Steel Microstructure. Materials Research, 18(3): 489-502.

Yang, Y.; Yan, B.; Li, J. and Wang, J. 2011: The effect of large heat input on the microstructure and corrosion behavior of simulated heat affected zone in 2205 duplex stainless steel. Corrosion Science, 53: 3756–3763.


Estadísticas

Resumen
55
PDF
33


Copyright (c) 2022 Amado Cruz-Crespo

Licencia de Creative Commons
Este obra está bajo una licencia de Creative Commons Reconocimiento-NoComercial 4.0 Internacional.