Using the jackhammer as rock digging method in Gabricar quarry, North Bioko, Equatorial Guinea

Authors

Keywords:

mining, rock digging, quarrying, jackhammer, basalt rocks.

Abstract

Blasting and drilling methods are mainly used in basalt rock quarries as blasting-digging methods. The purpose of this study is to argue the validity of using a jackhammer as a rock removal method in Gabricar quarry, based on knowing the geomechanical parameters of rocks as well as the technical-economic indicators for exploitation. Gravimetric, saturation, hydrostatic weighing, pycnometric and axial loads methods were used to obtain physical-mechanical properties of the rocks and geological survey, volumetric joint count, and strength coefficient were used to establish crack elements, block size, and rock mass quality, respectively. 4.75% humidity; 2.39% porosity; 5.73 g/cm3 volumetric mass; density of 26.44 g/cm3 and axial compressive strength of 173.53 Mpa as average values of physical-mechanical properties were obtained. Four families of cracks with spacing of 0.4m, 0.6m; 0.3m and 0.2m and 18mm openings; 13mm; 3mm and 9mm, respectively were established. Blocks are small and the rocky massif is of good quality. The technical-economic analysis showed the efficiency of the jackhammer as a blasting-based digging method in Gabricar quarry.

Downloads

Download data is not yet available.

Author Biography

Maday Cartaya-Pires, Universidad de Moa

http://orcid.org/0000-0002-0141-591X

References

ASTM-D2216. 2015: Métodos de Ensayo para Laboratorio para Determinar Contenido de Agua (Humedad) en Suelos y Rocas por masa.

Atkinson, W. 1977: Selection of Open Pit Excavating & Loading Equipment, Transaction Institute of Mining & Metallurgy – Section A, pp. A101 – A129.

Bindang, M. 2014: Actualización del Plan de Rehabilitación en la Cantera de Izaguirre. Trabajo de Diploma. Universidad Nacional de Guinea Ecuatorial, Malabo, Guinea Ecuatorial.

Chacin, F. 2000: Diseño y análisis de experimentos I. Editorial. FEPUVA-UCV. Caracas, Venezuela.

Freund, J., & Simona, G. 1992: Modern Statistics. 8 Ed. Editorial Prentice Hall. New Jersey. USA.

Hernández, N. 2015: Procedimiento para la elección del método de arranque de las rocas en canteras para áridos. (Tesis Doctoral), ISMMM, Moa, Cuba.

Brown, E.T (Ed) 1981: Rock Characterization, Testing and Monitoring. ISRM Suggested Methods :Pergamon, London, 211 p.

Noa, R. 2003: Indicaciones metodológicas para la elección del método de arranque de las rocas durante el laboreo de excavaciones subterráneas horizontales de pequeña y mediana sección en cuba oriental. (Tesis Doctoral), Instituto Superior Minero Metalúrgico, Moa, Cuba.

Nsue, G. B. 2016: Argumentación del método de arranque en la cantera de Gabricar. (Trabajo de Diploma), Universidad Nacional de Guinea Ecuatorial, Malabo, Guinea Ecuatorial.

Palmström, A. 2005: Measurements of and correlations between block size and rock quality designation (RQD). Tunnelling and Underground Space Technology, 20 (4) :362-377.

Pettifer, G. S., & Fookes, P. G. 1994: A Revision of the Graphical Method for Assessing the Excavatability of Rock, Quarterly Journal of Engineering Geology and Hydrogeology, 27 (2) :145 – 164.

Protodiaconov, M. 1962: Methods of studying the strength of rocks used in the U.S.S.R., in International Symposium on Mining Research, New York.

Published

2022-01-26

How to Cite

Nguema-Mozoho, A. A., Cartaya-Pires, M., Sargentón-Romero, G., & Watson-Quesada, R. (2022). Using the jackhammer as rock digging method in Gabricar quarry, North Bioko, Equatorial Guinea. Minería & Geología, 37(4), 414–425. Retrieved from https://revista.ismm.edu.cu/index.php/revistamg/article/view/art3_No4_2021

Most read articles by the same author(s)

<< < 1 2