Heat treatment of a nickel based super alloy
Keywords:
superalloy, heat treatment, electrolysis, forging, hardness.Abstract
The metallurgical variations that occur in a hastelloy C-276 superalloy exposed to heat treatment were determined. To carry out the same, the wedge of a valve made of this alloy was selected, its body was sectioned into three parts, which were exposed to a temperature of 1050 oC in a muffle furnace for one hour and cooled in water. It was determined that the standard sample is composed of dendritic austenite and ferrite, product of a forging process and then, these change to martensite and dendritic austenite by the thermal cycle. Due to the effect of the 217 HV treatment, in the structure established by the standards, it increases to 325 HV in the standard sample and up to 380 HV when carrying out the treatment due to the decrease in grain size.Downloads
References
AGARWAL, D. 2000. Nickel and nickel alloys. In: Uhlig´s corrosion Handbook. R. Winston Revie (ed.). John Wiley & Sons, Inc., New York, p. 831-851
AGHAIE-KHAFRI, M. & NOORI, N. 2011. Life prediction of Ni-base superalloy. Bulletin of Materials. Science 34(2): 305-309.
ALCÁNTARA, D.; FERNÁNDEZ, T. & RODRÍGUEZ, I. 2016. Influencia de la pulpa lixiviada sobre el desgaste de una aleación del tipo Hastelloy C 276. Minería y Geología 32(1): 93-105.
ARULMURUGAN, B. & MANIKANDAN, M. 2017. Development of welding technology for improving the metallurgical and mechanical properties of 21st century nickel-based superalloy 686. Ciencia e ingenería de los materiales: A. 691: 126-140.
BELAN, J. 2016. GSP and TCPPhases presented in nickel-base superalloys. Materials Today: Proceedings 3(4): 936-941.
BHATTACHARYYA, D.; DAVIS, J. & DREW, M. 2015. Characterization of complex carbide–silicide precipitates in a Ni–Cr–Mo–Fe–Si alloy modified by welding. Materials Characterization 105(9): 118-128.
BLAINE, G.; HUGO, L. & XIAO, H. 2010. Superalloys, alloying and performance. ASM International, USA pp. 17-44.
CARRANZA, R.; RODRÍGUEZ, M. & REBAK, R. 2007. Efecto del potencial sobre la corrosión en rendijas de la aleación C-22. Congreso SAM/CONAMET. San Nicolás.
DURÁN-MARTÍNEZ, W. & FERNÁNDEZ-COLUMBIÉ, T. 2018. Efecto del desgaste por corrosión en una superaleación expuesta a alta concentración de elementos en el fluido. Ciencia & Futuro 8(3): 20-31.
FERNÁNDEZ-COLUMBIÉ, T.; RODRÍGUEZ, I.; COBAS, M.; ALDANA, M.; UTRIA, M. & MEDINA, M. 2019. Microestructura de una aleación níquel-cromo-molibdeno soldada con electrodos revestidos Minería y Geología 35(2): 220-232.
MANIKANDAN, M.; ARIVAZHAGAN, N.; NAGESWARA, R. & REDDY, G. 2015. Improvement of microstructure and mechanical behavior of gas tungsten arc weldments of alloy C-276 by current pulsing. Acta Metallurgica Sinica 28(2): 208-215.
SAFARI, J. & NATEGH S. 2006. On the heat treatment of Rene-80 nickel-base superalloy. Journal of Materials Processing Technology 176(1–3): 240-250.
SALAH, N.; ENGIN, S. 2010. Machining conditions impact on the fatigue life of Waspaloy-Impact of grain size, 7th International Symposium on superalloy 718 and derivates, TMS.
SHUANGQUN, Z.; XISHAN, X.; GAYLORD, D.; SMITH. S. & SHAILESH, 2003. Microstructural stability and mechanical properties of a new nickelbased superalloy. Materials Science and Engineering A 355(1-2): 96-105.
ZADOROZNE, N.; CARRANZA, R.; GIORDANO, C.; ARES, A. & REBAK, R. 2011. Effect of the composition of nickel alloys on the anodic behavior in aqueous solutions of chloride and bicarbonate, Vol. 1475. In XXXV International Symposium. Scientific Basis for Nuclear Waste Management, Materials Research Society, Buenos Aires.
Published
How to Cite
Issue
Section
Esta obra está bajo una Licencia Creative Commons Reconocimiento-NoComercial 4.0 Internacional
La Revista Ciencia & Futuro es una revista de acceso abierto, todo el contenido está disponible gratuitamente sin cargo para el usuario o su institución. Los usuarios pueden leer, descargar, copiar, distribuir, imprimir, buscar o vincular los textos completos de los artículos, o utilizarlos para cualquier otro fin lícito, sin pedir permiso previo al editor o al autor. Todo lo anterior, de acuerdo con la definición de BOAI de acceso abierto.
Los autores que publican en esta revista están de acuerdo con los siguientes términos: Licencia Creative Commons Atribución-NoComercial permite que el beneficiario de la licencia tenga el derecho de copiar, distribuir, exhibir y representar la obra y hacer obras derivadas para fines no comerciales siempre y cuando reconozca y cite la obra de la forma especificada por el autor o el licenciante. Los autores pueden establecer por separado acuerdos adicionales para la distribución no exclusiva de la versión de la obra publicada en la revista (por ejemplo, situarlo en un repositorio institucional o publicarlo en un libro), con un reconocimiento de su publicación inicial en esta revista. Se permite y se anima a los autores a difundir sus trabajos electrónicamente (por ejemplo, en repositorios institucionales o en su propio sitio web) antes y durante el proceso de envío, ya que puede dar lugar a intercambios productivos, así como a una citación más temprana y mayor de los trabajos publicados (Véase The Effect of Open Access) (en inglés). Lo anterior debe realizarse siempre sobre el artículo ya publicado por Ciencia & Futuro.
Los autores mantienen el control sobre la integridad de sus trabajos y el derecho a ser adecuadamente reconocidos y citados.
A los editores se les otorgan derechos no exclusivos para publicar y distribuir.