Physical, mineralogical and chemical characterization of Moa ferronickel slags
Keywords:
slags, casting, olivine, forsterite, enstatiteAbstract
A pilot experiment was carried out by obtaining ferronickel casting slag from the saprolitic ore contained in Moa Occidental ore body for characterization of its physical, mineralogical and chemical composition in order to prove it has potential to be used on a large scale basis. With the application of X-ray fluorescence spectrometry and X-ray diffraction, it was confirmed that it is composed of mainly silica and magnesium oxides of 46% and 37%; respectively on average. Olivine, forsterite and clinoenstatite were identified as the main mineralogical phase. Density, casting pressure and viscosity were 3,20 g/cm 3 , 1 650ºC and de 6,5 poise; respectively. The results indicated there it is similar to the ferronickel slags obtained and used in construction as abrasive and refractory material (sandblasting) in other countries.Downloads
References
ANDREIEV, S. 1980: Trituración, desmenuzamiento y cribado de minerales. Mir, Moscú, 542 P.
ASTM E10 - 12 STANDARD. Test Method for Brinell Hardness of Metallic Materials.
RAMIREZ, Y, PONS, J, BARROSO-RODRÍGUEZ, D. 2007: Estudio preliminar para el mercado de las escorias de ferroníquel en Moa. Informe Técnico. Instituto Superior Minero Metalúrgico. Moa, 64 p.
BATIS-PANTASOUPOLO, G. & ZAGOGIANNIS-HEATON, A. 2001: Properties of oxygen convertor slag as anticorrosive pigment. Pigment & Resin Technology. 30 (2): 88 – 94.
BARROSO-RODRÍGUEZ, D.; J. PONS Y Y. RAMÍREZ 2007:Estudio preliminar para el mercado de las escorias de Ferrníquel en Moa. Informe Técnico. Instituto Superior Minero Metalúrgico. Moa, 62 p.
CALZADA-POMPA, I Y J. PONS 2003: Características y posibles usos de las escorias del proyecto de ferroníquel en Moa. Informe Técnico. Instituto Superior Minero Metalúrgico. Moa, 46 p.
COGOLLO-POWELL, R. & HERNÁNDEZ-HOLTHAM, Y. 2006: Caracterización de muestras arcillosas provenientes de la mina de níquel de Cerro Matoso (Córdova-Colombia). Colombiana de Física. 38 (1): 285 – 288.
DOURDOUNIS, E. & STIVANAKIS, V. 2001: High-alumina cement production from FeNi-ERF slag, limestone and disporic bauxite. Cement and Concrete Composites. 34(2): 941– 947.
HERNÁNDEZ, A. & CASTELLANOS, J. 1978: Obtención de ferroníquel por electrofundición a partir de minerales serpentiníticos de Moa. Minería y Geología. IX (3): 3-8.
JUZGA LEÓN, GIOVANNI A; VILLALBA RODRÍGUEZ, RUEDA SARMIENTO, R. 2009: Sustitución de la arena en procesos de chorreado en seco para la limpieza de superficies metálicas. Ciencia & Tecnología de Buques 2 (4) :37-47.
KRIBANDIN, B. 1989: Trabajo térmico y construcción de los hornos de la metalurgia ferrosa, Editorial Metalurgia, 464p.
MITROFANOV, I. 1982: Investigaciones de la capacidad de enriquecimiento de los minerales. Mir, Moscú, 412 p.
MONGOMERY, D. & WANG, G. 1991: Instant-chilled steel slag aggregate in concrete, streng related properties. Cement and concrete research. 21(6):1083-1091.
ONISHIN, B. & CASTELLANOS, J. 1986: Producción de aleaciones de FeNi a partir de la mena niquelífera de baja ley y el Cr203 y/o cromita. Minería y Geología. XVI (2): 4-9.
PÉREZ-RODRÍGUEZ, H. A & PÉREZ-VILLAMIL, F.R. 2007: Estudio de las fases predominantes y caracterización de las escorias del proceso de obtención de ferro níquel. Scientia et Technica. XIII (36): 555-560. ISSN 0122-1701: 555 – 560.
RAMÍREZ-CRUZ, Y; J.PONS . 2008: Caracterización de las escorias de fundición de la producción piloto de ferroníquel del yacimiento Moa Occidental y posible utilización. Tesis de Maestría de Metalurgia. Instituto Superior Minero Metalúrgico. Moa, 94 p.
SHOYA, M. & SUGITA, S. 1999: Compactabilidad del concreto fresco con los agregados finos no ferrosos, escoria de ferroníquel y los agregados finos de escoria de cobre. Cemento y Concreto. 16(8): 579 – 590.
SMIRNOV, N. 1984: Producción de Acero. Editorial Pueblo y Educación. La Habana, 424 p.
TAKAYUKI, K. & NOBUAKI, T. 1998: Efectos de partículas finas sobre la resistencia para la acción de congelar y el deshelar del concreto con agregado fino de escoria de ferroníquel. Cemento y Concreto. 52(4): 468-473.
ZEVGOLIS, E. & MPOSKOS, E. 1993: Study of Slags from Electric Furnaces for the reductive Smelting of Nickeliferous Laterites. Mining and Metallurgical Chronical. 2 (3): 122-128.
Published
How to Cite
Issue
Section
- Authors retain copyright and guaranteeing the right magazine to be the first publication of the work as licensed under a Creative Commons Attribution-NonCommercial that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors may establish separate supplemental agreements for the exclusive distribution version of the work published in the journal (eg, place it in an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are allowed and recommended to disseminate their work through the Internet (e.g., in institutional telematic archives or on their websites) before and during the submission process, which can produce interesting exchanges and increase citations of the published work. (See The effect of open access)