Stress-strain field for explosions with detonating cord in tunneling

Authors

  • Yoandro Diéguez-García Instituto Superior Minero Metalúrgico de Moa
  • José A. Otaño-Noguel Instituto Superior Minero Metalúrgico de Moa
  • Gilberto Sargentón-Romero Universidad de Holguín

Keywords:

Stress-strain field, explosion in tunnels, detonating cord, explosion design

Abstract

In this article it is determines the stress-strain field produced in the rock massif of Buenaventura– Sabanilla tunnel after the explosion of the load detonating cord of 40 g/m. The calculation was carried out for a distribution with annular air space between the explosive substance and the load chamber, using the principle of the physical essence for the action of the explosion on the medium. The results were obtained studying the cracks produced in the front of the excavation, and determining the physical-mechanical properties of the rocks. With these values the trituration, cracking and decrustation radii were determined as initial parameters for the explosion design in tunneling.

Downloads

Download data is not yet available.

References

BOROVIKOV, V. A. & VANIAGUIN, I. F. 1974: Física de la fragmentación explosiva. Instituto de Minas de San Petersburgo, 60 p.

DIÉGUEZ-GARCÍA Y. 2012: Campo tenso-deformacional que se produce al explosionar cargas con cordón detonante durante el laboreo de túneles. Tesis de maestría. Instituto Superior Minero Metalúrgico. 63 p.

HOEK, E. 2007a: Blasting damage in rock. En: Practical Rock Engineering. New 2007a. edition complete, 24 MB. (en soporte digital) Consulta: 15 mayo 2007. Disponible en: www.rocscience.com.

--------- 2007b: Structurally controlled stability in tunnels. En: Practical Rock Engineering. New 2007b. edition complete, 24 MB. (en soporte digital) Consulta: 15 mayo 2007. Disponible en: www.rocscience.com.

--------- 2007c: Shear strength of rock discontinuities. En: Practical Rock Engineering. New 2007c. edition complete, 24 MB. (en soporte digital) Consulta: 29 mayo 2007. Disponible en: www.rocscience.com.

HOEK, E.; CARRANZA-TORRES C.; DIERICHS, S. Y CORKUM, B. 2008: Integration of geotechnical and structural design in tunnelling. Proceedings University of Minnesota. 56th Annual Geotechnical Engineering Conference. Minneapolis, 29 feb 2008, 1-53. (en soporte digital). Disponible en: www.rocscience.com. Consulta: 12 marzo 2008.

KAZIKAEV, D. M. 1981: Procesos geomecánicos en la explotación conjunta y ulterior de las menas. Nedra, Moscú, 89 p.

KALICHENKO, V. M; STIEPIN, N. I; TUPIKLIN, I. I Y USHAKOV, I. N. 2000: Geometría del subsuelo. Novocherkask, YRGTU, 78 p.

OTAÑO-NOGUEL, J. 1998: Acción de la explosión en las rocas ligadas. Diplomado de voladuras, módulo 3, UNL, Loja, Ecuador.

PEDRO-ALEXANDRE, A.; JOE-BOY, S. & OTAÑO NOGUEL, J. 2006. Análisis del diseño de voladuras con cargas compactas en la cantera de áridos El Cacao. Minería y Geología 22(4).

ULAEX, S. A. 1999. Unión Latinoamericana de Explosivos, S. A. Editorial SI-MAR S.A., 32 p.

Published

2013-09-25

How to Cite

Diéguez-García, Y., Otaño-Noguel, J. A., & Sargentón-Romero, G. (2013). Stress-strain field for explosions with detonating cord in tunneling. Minería & Geología, 29(3), 38–55. Retrieved from https://revista.ismm.edu.cu/index.php/revistamg/article/view/768

Most read articles by the same author(s)

1 2 > >>