Preparation of a digital elevation model through 3D laser scanning technology
Keywords:
Laser scanning, digital elevation model, Cuban lateritic ore bodies, mining topographyAbstract
The digital elevation models for the Cuban lateritic ore bodies are obtained through the use of total stations and global positioning systems. The objective of this investigation is to develop a procedure to implement the 3D laser scanning technology in the mining operations executed in these ore bodies. This includes an evaluation of several options to obtain the DEM using this technology which is mote productive, efficient and accurate. The application of the 3D laser scanning technology resulted in an increased reliability, reduced risks and impact to the environment associated to the total stations.Downloads
References
BRENNER, C. 2006: Laser Scanning. Aghios Nikolaos (Tutor) Tesis de ingeniería. International Summer School “Digital Recording and 3D Modeling”. 120 p.
DELUIS, J. M. 2009: Contraste en la ejecución de auscultaciones geodésicas por métodos clásicos y con láser escáner. Benjamín Piña Patón (Tutor). Tesis doctoral. Universidad de Cantabria. 296 p.
LERMA, J. L. 2008: Teoría y práctica del Escaneado Láser Terrestre. En: 3D Risk Mapping. Memorias. 1-30 septiembre, 40-69.
MAÑANA, P.; RODRÍGUEZ, A. & BLANCO, R. 2008: Una experiencia en la aplicación del Láser Escáner 3D. Arqueología de la Arquitectura 5(1): 15-32.
MARAMBIO, A. & AMPARO, F. 2009: La aplicación del escáner láser terrestre en la catalogación del patrimonio arquitectónico del casco histórico de Castellfollit de la Roca. UPC. 8 p.
MÁRQUEZ, A. 2010: Un tratado sobre el Escáner Terrestre TLS. Mecinca 1(1): 1-30.
MIRANDA, P. M. 2009: Obtención de un modelo digital de terreno mediante tecnología lidar, aplicado en una mina a rajo abierto. Martín Olivares Altamirano (Tutor). Tesis de ingeniería. Universidad de Santiago de Chile. 98 p.
UNZUETA, C. A. 2003: 3D Láser Scanner, aplicado a levantamientos en proyectos de ingeniería. Emilio Uribe Rivera (Tutor). Tesis de ingeniería. Universidad de Santiago de Chile. 118 p.
VELÁSQUEZ, J. A. 2005: Diseño de un escáner láser 3D a partir de un sistema de medición láser 2D Sick LMS 200. Umbral científico 6(1): 83-90.
Published
How to Cite
Issue
Section
- Authors retain copyright and guaranteeing the right magazine to be the first publication of the work as licensed under a Creative Commons Attribution-NonCommercial that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors may establish separate supplemental agreements for the exclusive distribution version of the work published in the journal (eg, place it in an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are allowed and recommended to disseminate their work through the Internet (e.g., in institutional telematic archives or on their websites) before and during the submission process, which can produce interesting exchanges and increase citations of the published work. (See The effect of open access)