Mathematical models to predict rheological parameters of lateritic hydromixtures
Keywords:
lateritic hydromixtures, rheological parameters, mathematical models.Abstract
The present work had as objective to establish mathematical models that allow the prognosis of the rheological parameters of the lateritic pulp at concentrations of solids from 35% to 48%, temperature of the preheated hydromixture superior to 82 ° C and number of mineral between 3 and 16. Four samples of lateritic pulp were used in the study at different process locations. The results allowed defining that the plastic properties of the lateritic pulp in the conditions of this study conform to the Herschel-Bulkley model for real plastics. In addition, they show that for current operating conditions, even for new situations, UPD mathematical models have a greater ability to predict rheological parameters than least squares mathematical models.Downloads
References
AVRAMIDIS, S. & TURIAN, R. M. 1991: Yield Stress of Laterite Suspensions. Journal of Colloid and Interface Science 143(1): 54.
BAXTER, B. 1992: The Interpolation Theory of Radial Basis Functions. Tesis doctoral. University of Cambridge.
BEKKOUR, K. M.; LEYAMA, A. & BENCHABANE, O. 2005: Time-dependent rheological behavior of bentonite suspensions: An experimental study. Journal of Rheology 49(6): 1329-1345.
BHATTACHARYA, I. N. & PANDA, P. 1998: Rheological behaviour of nickel laterite suspensions. International journal of mineral processing 53(4): 251-263.
BLAKEY, B. C. 2003: Characterizing the rheology of laterite slurries. International journal of mineral processing 70(1): 23-39.
BRICEÑO, M.; SALAGER, J. & BERTRAND, J. 2001: Influence of the dispersed phase viscosity on the mixing of concentrated oil-in-water emulsions in the transition flow regime. In: International Symposium on Mixing in Industrial Processes – ISMIP4. Toulouse, Francia.
BRICEÑO, M. I.; RAMIREZ, M.; BULLÓN, J. & SALAGER, J. 1997: Customizing Drop Size Distribution to Change Emulsion Viscosity. In: 2nd World Congress on Emulsion CME2. Francia.
CARAM, Y.; BAUTISTA, F.; PUIG, J. E. & MANERO, O. 2006: On the rheological modeling of associative polymers. Rheologica acta 46(1): 45-57.
CERPA, A. & GARCELL, L. 1998: Propiedades superficiales y reológicas de suspensiones minerales lateríticas. In: Metalurgia 98. La Habana.
CLARK, I. Y. H. W. 2007. Practical geostatistics. Ecosse North America Llc., Kinkos, Westerville, Ohio USA.
GARCELL, L. 2001: Flujo por tuberías de suspensiones minerales no newtonianas. Monografía. Universidad de Oriente.
GARCELL, L.; DÍAZ, L. & SURÍS, G. 1988: Transferencia de cantidad de movimiento, calor y masa. Pueblo y Educación, La Habana.
GARCELL, L.; MORALES, M. P.; ANDRES-VERGES, M.; TARTAJ, P. & SERNA, C. J. 1998: Interfacial and Rheological Characteristics of Maghemite Aqueous Suspensions. Journal of Colloid and Interface Science 205(2): 470-475.
GOMES, M. & MARCHESE, T. 2013: Ajuste de Modelos Reológicos Mecânicos no Creep de Polipropileno, Poliestireno e Policarbonato: Comparação com o MEF. Revista Iberoamericana de Polímero 14(2): 65-82.
HERNÁNDEZ, G.; PÉREZ, L. & RODRÍGUEZ, K. 2016: Influencia de los parámetros reológicos de la pulpa de mineral laterítico en la eficiencia del sistema de bombeo de hidromezclas. In: 3er Congreso Internacional de Minería y Metalurgia. Matanzas, Cuba.
HERNÁNDEZ, G.; ROSA, Y. & DURÁN, C. 2015: Influencia de la temperatura del fluido en la eficiencia energética de los sistemas de bombeos. In: CINAREM 2015, ISMMM. Moa, Hoguín.
IŞÇI, S. F.; SENIHA, Ö. & GÜNGÖR, N. 2005: Investigation of rheological and colloidal properties of bentonitic clay dispersion in the presence of a cationic surfactant. Progress in Organic Coatings 54(1): 28-33.
IZQUIERDO, R.; TURRO, A. & NIKOLAEV, A. 2001: Hidrotransporte del mineral laterítico en régimen estructural. Minería & Geología 18(2): 53-59.
KLEIN, A. & HALLBOM, D. 2002: Modifying the rheology of nickel laterite suspensions. Minerals Engineering 15(10): 745-749.
LARSON, R. G. 1999: The Structure and Rheology of Complex Fluids. (Vol. 150). Oxford University Press, New York.
LEGRÁ, A. A. 2015: Método UPD-L para estimar valores de una variable geominera medidos en un conjunto de puntos de Rn. Minería & Geología 31(1): 1-12.
LEGRÁ, A. A.; LAMORÚ, A. & CALA, H. A. 2016: Evaluación de modelos de variables geo-tecnológicas en un bloque de un yacimiento laterítico cubano: Quinta parte: Optimización combinatoria del Método UPD. Minería & Geología 32(4): 33-48.
LI, Z.; WANG, J.; PÉREZ-CAMARGO, R.; MÜLLER, A. J.; ZHANG, B.; GRAYSON, S. M. & HU, W. 2016: Non-monotonic molecular weight dependence of crystallization rates of linear and cyclic poly(epsilon-caprolactone)s in a wide temperature range. Polymer International 65(9): 1074-1079.
MCGUIRE, M. J.; ADDAI-MENSAH, J. & BREMMELL, K. 2006: The effect of polymer structure type, pH and shear on the interfacial chemistry, rheology and dewaterability of model iron oxide dispersions. Colloids and Surfaces A: Physicochemical and Engineering Aspects 275(1): 153-160.
MEWIS, J.; FRITH, W.; STRIVENS, T. & RUSSEL, W. 1989: The Rheology of Suspensions Containing Polymerically Stabilized Particles. AIChE Journal 35(3): 415-422.
OHTAKE, T.; HANO, K. & TAKAGI, F. 1987: Effects of viscosity on drop diameter of w/o emulsion dispersed in a stirred tank. Journal of Chemical Engineering of Japan 20(5): 443-447.
PAL, R. & MASLIYAH, J. 1990: Rheology of oil in water emulsions with added solids. The Canadian Journal of Chemical Engineering 68(1): 24-28.
PÉREZ, L. 2004: Efecto de la temperatura y de la distribución de tamaño de las partículas sobre la correlación entre las propiedades reológicas y coloidequímicas de las suspensiones lateríticas. Tesis de maestría. Universidad de Oriente, Santiago de Cuba.
PÉREZ, L. & GARCELL, L. 2006: Influencia de la distribución de tamaño de las partículas y de la temperatura sobre la reología de suspensiones lateríticas. Tecnología Química XXVI(1).
PÉREZ, G. L. 2010a: Modelo matemático que correlaciona los principales factores de influencia sobre el comportamiento reológico de las pulpas lateríticas. Tesis doctoral. Universidad de Oriente, Santiago de Cuba.
PÉREZ, L.; GARCELL, L.; ROJAS, A. & SIMOES, R. 2010b: Mineralogía y reología de suspensiones minerales del proceso de lixiviación ácida a presión en Moa. Minería & Geología 26(4): 16-35.
RODRÍGUEZ, T. H.; ANGULO, H. J. & FALCÓN, J. 2015: Comportamiento reológico de las emulsiones empleando productos de la pirolisis. Tecnología Química XXXV(3): 412-423.
VERNÁEZ, O.; GARCÍA, A.; CASTILLO, F.; VENTRESCA, M. L. & MÜLLER, A. J. 2016: Oil-based self-degradable gels as diverting agents for oil well operations. Journal of Petroleum Science and Engineering 146: 874-882.
Published
How to Cite
Issue
Section
- Authors retain copyright and guaranteeing the right magazine to be the first publication of the work as licensed under a Creative Commons Attribution-NonCommercial that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors may establish separate supplemental agreements for the exclusive distribution version of the work published in the journal (eg, place it in an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are allowed and recommended to disseminate their work through the Internet (e.g., in institutional telematic archives or on their websites) before and during the submission process, which can produce interesting exchanges and increase citations of the published work. (See The effect of open access)
